CleanOne™ Pass-Through Chambers

  • Standard material of construction is 304 grade stainless steel
  • Access doors that feature a stainless steel door frame, static dissipative PVC windows and a one-piece, elastomer gasket
  • Easy to open/close precision machined lift latches provide optimal compression of the door gasket
  • Foolproof interlock mechanism that allows only one door at a time to be opened, preventing cross contamination
  • Electro-polishing to remove surface impurities for corrosion, stain and bacteria resistance surfaces
  • Available floor mount models feature a low-profile ramp, allowing carts and other wheeled equipment to be passed through the chamber
  • Offered in a variety of standard sizes (special order sizes also available upon request)

CleanOne™ Pass-Through Chamber Design – The CleanOne™ Pass-Through Chamber features standard square corners on the chamber sides and small radius corners along both door opening areas. Outer chamber continuous seam welds are ground and finished leaving smooth and easy surfaces. CleanOne™ Pass-Through Chambers are also available with an electro-polished finish, which removes any impurities, leaving homogenous surfaces for enhanced corrosion, stain and bacteria resistance. Each pass-through comes standard with two sets of stainless steel mounting
brackets, allowing the chamber to be secured, while closing off the wall opening in which it was placed.

To control cross contamination, each CleanOne™ Pass-Through features the same interlock mechanism that is installed on Cleanroom Synergy’s premium
BioClean™ Pass-Through Chamber. This interlock mechanism is durable and maintenance-free and ensures that no more than one door can be opened at a
time, thus controlling contamination influx to critical areas. The interlock mechanism itself is isolated in its own stainless steel compartment, which
is off-set to the side to the side of the chamber.

Since the access doors are the life line of the pass-through chamber, they are built to withstand rigorous use without failure. The unique door design allows
the gasket to be held in-place without an adhesive, eliminating the possibility for it to become displaced and fail to properly seal. Overall fabrication
materials allow for thorough cleaning with commonly used cleaners and disinfectants.

Standard pass-through chamber door features:

  1. Stainless steel frame protects the viewing window from damage, while creating a more rigid door assembly.
  2. Static dissipative PVC viewing window provides excellent chemical resistance and helps to control contamination attraction build-up
    by safely dissipating the static charges in which they are attracted.
  3. Heat-fused, one-piece elastomer gasket material provides excellent chemical resistance and will not creep, sag, over-compress, or out-gas.
  4. Heavy-gauge, stainless steel wrap-around hinges that prevent the doors from sagging and eliminates “hinge point compression” of the gasket material
    (typical of piano style hinges).
  5. Chrome plated precision machined billet aluminum compression lift latches that are easy to open and that ensure a positive door seal.
  6. All fastening hardware is of 18-8 grade stainless steel.
CleanOne™ Pass-Through Chambers
Pass –Through
Style
Outside
Nominal Dimensions*
in inches (mm) W x D x H
Inside
Nominal Clearance
in inches (mm) W x D x H
304 Stainless Steel
CleanOne™ Pass-Through
316 Stainless Steel
CleanOne™ Pass-Through
Part # Part #
Wall Mount 16” x 12” x 14”
(406 x 305 x 356)
12.25” x 12” x 12”
(311 x 305 x 305)
PT-C222S PT-C222E
18” x 12” x 20”
(457 x 305 x 508)
14.25” x 12” x 18”
(362 x 305 x 457)
PT-C428S PT-C428E
18” x 16” x 20”
(457 x 406 x 508)
14.25” x 16” x 18”
(362 x 406 x 457)
PT-C468S PT-C468E
20” x 16” x 22”
(508 x 406 x 559)
16.25” x 16” x 20”
(413 x 406 x 508)
PT-C660S PT-C660E
20” x 20” x 22”
(508 x 762 x 559)
16.25” x 20” x 20”
(413 x 508 x 508)
PT-C600S PT-C600E
22” x 18” x 20”
(559 x 457 x 508)
18.25” x 18” x 18”
(464 x 457 x 457)
PT-C888S PT-C888E
22” x 24” x 20”
(559 x 610 x 508)
18.25” x 24” x 18”
(464 x 762 x 457)
PT-C848S PT-C848E
24” x 18” x 22”
(610 x 457 x 559)
20.25 x 18” x 20”
(514 x 457 x 508)
PT-C080S PT-C080E
24” x 24” x 22”
(610 x 610 x 559)
20.25” x 24” x 20”
(514 x 610 x 508)
PT-C040S PT-C040E
28” x 24” x 26”
(711 x 610 x 660)
24.25” x 24” x 24”
(616 x 762 x 610)
PT-C444S PT-C444E
28” x 36” x 26”
(711 x 762 x 660)
24.25” x 36” x 24”
(616 x 914 x 610)
PT-C464S PT-C464E
28” x 24” x 38”
(711 x 610 x 965)
24.25” x 24” x 36”
(616 x 610 x 914)
PT-C446S PT-C446E
28” x 30” x 38”
(711 x 762 x 965)
24.25” x 30” x 36”
(616 x 762 x 914)
PT-C406S PT-C406E
28” x 36” x 38”
(711 x 914 x 965)
24.25” x 36” x 36”
(616 x 914 x 914)
PT-C466S PT-C466E
Floor Mount 28” x 24” x 38”
(711 x 610 x 965)
24.25” x 24” x 36”
(616 x 610 x 914)
PTC-C446S PTC-C446E
28” x 30” x 38”
(711 x 762 x 965)
24.25” x 30” x 36”
(616 x 762 x 914)
PTC-C406S PTC-C406E
34” x 30” x 42”
(864 x 762 x 1067)
30.25” x 30” x 40”
(768 x 762 x 1016)
PTC-C000S PTC-C000E
34” x 36” x 42”
(864 x 762 x 1067)
30.25” x 36” x 40”
(768 x 762 x 1016)
PTC-C060S PTC-C060E
34” x 30” x 48”
(864 x 762 x 1219)
30.25” x 30” x 46”
(768 x 762 x 1219)
PTC-C006S PTC-C006E
34” x 36” x 48”
(864 x 914 x 1219)
30.25” x 36” x 46”
(768 x 914 x 1219)
PTC-C066S PTC-C066E

* Overall outside dimensions do not include the door frames, latches, hardware or the ramp in the case of the floor mount models